ABB Drejelysdæmper LED 2-100W, Halogen 10-400 W. indsatsen leveres uden afdækning.

ABB drejelysdæmper for LED belysning 2-100W/VA med neonlampe
Optimeret til dæmpning af Philips retrofit LED'er (LEDi)
Til 230V glødelamper, Wolfram halogenlamper, lavspændings halogenlamper med konventionelle eller elektroniske transformere og energibesparende lyskilder 10-250W/VA
Lysdæmperen kan håndtere LED og konventionel belastning i samme installation
Med elektronisk kortslutningsbeskyttelse
Med elektronisk overbelastningsbeskyttelse
Med justerbar mindste lysstyrke

- Halogen belastnings område er: 10400 W
- Frekvens område er 5060 Hz

Very small installation depth: < 20 mm
Without claws.
With rotary control, two-way switch and soft-catch.
2-wire connection (neutral conductor not required)
Optimised for dimming of retrofit LED lamps (LEDi).
For dimmable Retrofit-LEDs (LEDi).
For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers.
For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps.
Mix operaton of LEDi with conventional loads possible.
With manually adjustable operating mode: trailing / leading edge control.
With adjustable minimum/maximum brightness.
Low-noise level by MOSFET transistors.
With electronic short-circuit protection. With electronic overload protection.
Without cover plate.
Rated voltage: 230 V~, + 10% / - 10%
Rated frequency: 50 Hz/60 Hz
Nominal power: 2 - 100 W/VA (leading edge control)
Nominal power: 2 - 400 W/VA (trailing edge control)

Protection class (Device): IP 20
Temperature range (Device): 0 °C to 35 °C

Illuminable with neon lamp. Neon lamp included in delivery with cover plate.
In the case of conventional transformers, take ~20% transformer loss into account.
In case of electronic transformers, 5 % transformer losses.